NFS Protocol Export page
The Export page enables you to configure an NFS protocol export directory path, network clients, and NFSv4 referrals.
To configure these settings outside of the configuration wizard, select Protocols > NFS > Create.
Table 37. Export page settings
Item Description
Directory Path Enter a pathname for the export.
Add (+) button Click + to enter a system client or NFSv4 referral.
Pencil icon Modify a client or NFSv4 referral.
Delete (X) button Click X to delete a selected client or NFSv4 referral.
DD VTL protocol
The DD VTL Protocol settings section enables you to configure the DD Virtual Tape Library settings. Click Yes to configure the
DD VTL settings, or click No to skip DD VTL configuration.
VTL Protocol Library page
The Library page enables you to configure the DD VTL protocol settings for a library.
To configure these settings outside of the configuration wizard, select PROTOCOLS > VTL > Virtual Tape Libraries > VTL
Service > Libraries > More Tasks > Library > Create
Table 38. Library page settings
Item Description
Library Name Enter a name of from 1 to 32 alphanumeric characters.
Number of Drives Number of supported tape drives.
Drive Model Select the desired model from the drop-down list:
● IBM-LTO-1
● IBM-LTO-2
● IBM-LTO-3
● IBM-LTO-4
● IBM-LTO-5 (default)
● HP-LTO-3
● HP-LTO-4
Number of Slots Enter the number of slots per library:
● Up to 32,000 slots per library
● Up to 64,000 slots per system
● This should be equal to, or greater than, the number of drives.
Number of CAPs (Optional) Enter the number of cartridge access ports (CAPs):
● Up to 100 CAPs per library
● Up to 1000 CAPs per system
Changer Model Name Select the desired model from the drop-down list:
● L180 (default)
● RESTORER-L180
● TS3500
● I2000
● I6000
● DDVTL
Starting Barcode Enter the desired barcode for the first tape, in the format A990000LA.
90 Configure System for Use
To Next Page
Loading...
