1 Rear tag...................................................................................................................................................................... 10
2 Front tag.....................................................................................................................................................................10
3 Serial number for initial password........................................................................................................................ 10
4 Adjusting the lift arm bar to just under 17 inches............................................................................................. 13
5 Reconfiguring the portable lift with the Voyager conversion kit.................................................................. 14
6 Sliding rail assembly - 2U systems....................................................................................................................... 16
7 CMA brackets............................................................................................................................................................17
8 CMA arms and separators...................................................................................................................................... 17
9 Remove the original CMA bracket........................................................................................................................18
10 Attach outer CMA bracket to the rails................................................................................................................19
11 Attach inner CMA bracket to the rails................................................................................................................20
12 Installing the rear end of the rail...........................................................................................................................21
13 Installing the front end of the rail......................................................................................................................... 21
14 Installing screws....................................................................................................................................................... 22
15 Pull the inner rails out of the cabinet..................................................................................................................22
16 Install the system in the rails.................................................................................................................................23
17 Slide the system into the cabinet........................................................................................................................ 23
18 Installing the front bezel........................................................................................................................................ 24
19 Install the first separator........................................................................................................................................25
20 Install the first arm.................................................................................................................................................. 25
21 Close the first arm...................................................................................................................................................26
22 Install the second separator.................................................................................................................................. 26
23 Install the second arm.............................................................................................................................................27
24 Close the second arm............................................................................................................................................. 27
25 Rail installation..........................................................................................................................................................30
26 Installing the right rail to the rear channel..........................................................................................................31
27 Installing the right rail to the front channel........................................................................................................31
28 Sliding the shelf chassis into the rails................................................................................................................. 33
29 Unlocking the casters............................................................................................................................................. 33
30 Locking the casters................................................................................................................................................. 34
31 Removing the straps............................................................................................................................................... 34
32 Inserting and securing the shelf to the cabinet (shoulder screw configuration).....................................35
33 Removing semi-captive screws............................................................................................................................36
34 Installing ears to rack using truss head screws................................................................................................ 36
35 Installing top cover using truss head screws (shelf and rack not shown).................................................36
36 Removal of semi-captive screws......................................................................................................................... 37
37 Blue tab on rail must be pushed in.......................................................................................................................38
38 Installing and securing the rails—front.............................................................................................................. 39
39 Installing and securing the rails—rear................................................................................................................ 39
40 Installing tray.............................................................................................................................................................39
Figures
Figures 5
To Next Page
Loading...
