DD System Manager configuration wizard
D
D System Manager provides a single, consolidated management interface that allows for configuration and monitoring of many
system features and system settings.
For more information about using the DD System Manager configuration wizard, see the section on Configuring the system with
the DD System Manager GUI interface configuration wizard.
Configuring the network
Steps
1. Enter yes to configure the system for network connectivity.
Network Configuration
C
onfigure Network at this time (yes|no) [no]:
yes
2. Enter yes to configure DHCP (Dynamic Host Configuration Protocol) to obtain network parameters (such as, the host
name, domain name, and IP addresses) dynamically from a DHCP server. Or enter no to configure the parameters manually.
Use DHCP
U
se DHCP for hostname, domainname, default gateway
and DNS servers? (At least one interface needs to
be configured using DHCP) (yes|no|?)
3. Enter a fully qualified domain name (FQDN) for the host name; for example, str01.yourcompany.com. Or accept the
host name, if the system was able to discover it.
Enter the hostname for this system
(
fully-qualified domain name)[]:
4. Enter the DNS (Domain Name System) domain name; for example, yourcompany.com. Or accept the domain name, if the
system was able to discover it.
Domainname
E
nter your DNS domainname []:
5. Enable and configure each Ethernet interface. Accept or decline DHCP for each interface. If the port does not use DHCP to
discover network parameters automatically, enter the information manually.
Ethernet port ethMa
E
nable Ethernet port ethMa (yes|no|?) [no]:
yes
Use DHCP on Ethernet port ethMa (yes|no|?) [no]:
Enter the IP address for ethMa [192.168.10.185]:
Enter the netmask for ethMa [255.255.255.0]:
Ethernet port ethMb
Enable Ethernet port ethMb (yes|no|?) [no]:
no
6. Enter the IP address of the default routing gateway. Or accept the default gateway, if the system was able to discover it.
Default Gateway
E
nter the default gateway IP address:
192.168.10.1
7. Enter the IPv6 address of the default routing gateway. Or accept the IPv6 address of the default gateway, if the system was
able to discover it. If IPv6 is not in use, leave the field empty, and press Enter to continue.
IPV6 Default Gateway
E
nter the ipv6 default gateway IP address:
8. Enter up to three DNS servers to use for resolving host names to IP addresses. Use a comma-separated or space-separated
list. Enter a space for no DNS servers. Or accept the IP addresses of the DNS servers, if the system was able to discover
them.
Configure System for Use 69
To Next Page
Loading...
