Dell EMC PowerProtect DD9900 - Install the CMA Arms

Note: The number of screws required to hold the bezel faceplate might vary depending
on the height of the system.
l
1U bezel - 4 screws
l
2U bezel - 9 screws
l
3U bezel - 8 screws
l
4U bezel - 16 screws
4. Install the optional front bezel.
5. Install the standard faceplate into the original bezel before returning.
Install the CMA arms
Procedure
1. Install the first separator on the bracket.
Install the System in the Rack
28 Dell EMC PowerProtect DD9900 System Installation Guide