Table 15 License Configuration page values
Item Description
Add Licenses Select this option to add licenses from a license file.
Replace Licenses If licenses are already configured the Add Licenses selection
changes to Replace Licenses. Select this option to replace
the licenses already added.
Delete Licenses Select this option to delete licenses already configured on the
system.
Network
The Network section enables you to configure the network settings. Click Yes to configure the
network settings, or click No to skip network configuration.
Network General page
The General page enables you to configure network settings that define how the system
participates in an IP network.
To configure these network settings outside of the configuration wizard, select Hardware >
Ethernet.
Table 16
General page settings
Item Description
Obtain Settings using DHCP Select this option to specify that the system collect network
settings from a Dynamic Host Control Protocol (DHCP)
server. When you configure the network interfaces, at least
one of the interfaces should be configured to use DHCP.
Manually Configure Select this option to use the network settings defined in the
Settings area of this page.
Host Name Specifies the network hostname for this system.
Note: If you choose to obtain the network settings
through DHCP, you can manually configure the hostname
at Hardware > Ethernet > Settings or with the net
set hostname command. You must manually configure
the host name when using DHCP over IPv6.
Domain Name Specifies the network domain to which this system belongs.
Default IPv4 Gateway Specifies the IPv4 address of the static default gateway to
which the system will forward network requests when there
is no route entry for the destination system.
Default IPv6 Gateway Specifies the IPv6 address of the static default gateway to
which the system will forward network requests when there
is no route entry for the destination system.
Configure System for Use
80 Dell EMC PowerProtect DD9900 System Installation Guide
To Next Page
Loading...
