Dell EMC PowerProtect DD9900 - System Settings

Table 24 Cloud Tier values (continued)
Item Description
Configured New or existing storage. This does not apply to DDVE
instances.
Type SCSI. This only applies to DDVE instances.
a.
The DD OS convention for computing disk space defines one gibibyte as 2
30
bytes, giving a
different disk capacity than the manufacturer’s rating.
Create File System page
The Create File System page displays the allowed size of each storage tier in the file system, and
provides a setting to automatically enable the file system after it is created.
System Settings
The System Settings section enables you to configure system passwords and email settings. Click
Yes to configure the system settings or click No to skip system settings configuration.
System Settings Administrator page
The Administrator page enables you to configure the administrator password and define how the
system communicates with the administrator.
Table 25
Administrator page settings
Item Description
User Name The default administrator name is sysadmin . The sysadmin
user cannot be renamed or deleted.
Old Password Type the old password for sysadmin.
New Password Type the new password for sysadmin.
Verify New Password Retype the new password for sysadmin.
Admin Email Specify the email address to which DD System Manager
sends alert and autosupport email messages.
Send Alert Notification Emails
to this address
Check to configure DD System Manager to send alert
notifications to the Admin email address as alert events
occur.
Send Daily Alert Summary
Emails to this address
Check to configure DD System Manager to send alert
summaries to the Admin email address at the end of each day.
Send Autosupport Emails to
this address
Check to configure DD System Manager to send the Admin
user autosupport emails, which are daily reports that
document system activity and status.
Configure System for Use
86 Dell EMC PowerProtect DD9900 System Installation Guide