Dell EMC PowerVault MD3060e - Server Hardware Management Installation for Linux

Silent installation
NOTE: Linux installation requires full ‘root’ user rights. Console installation is no longer available. Instead, run the installer with
switch --mode unattended for the default installation. A default installation requires no arguments.
1 Download the Storage Enclosure Management Software installation package from Dell.com/support.
2 Navigate to the directory containing the extracted installer.
3 Run the command:
StorageEnclosureManagement-x.x.x.x-<OS>-installer --mode unattended
This command installs the Storage Enclosure Management with all the default settings.
4 Accept all End User License Agreements. The default installation directory is: /opt/Dell/StorageEnclosureManagement.
5 To change the installation directory, uncomment and edit the following line in the installer.options le:
;prefix=/opt/dell/StorageEnclosureManagement
6 To start the SNMP daemon after installation, set the value of SNMP to 1.
SNMP=1
7 Run the command:
StorageEnclosureManagement-x.x.x.x-<OS>-installer --mode unattended --options /path/to/
installer.options
After successful installation, you can run the secli commands from the terminal.
12
Installing Storage Enclosure Management Software