SHM CLI
This guide is intended for system administrators, developers, and engineers who need to use the SHM CLI and its associated commands.
For more information, see the hardware and software manuals that are shipped with the system.
NOTE: For Server Hardware Manager 1.7 the secli executable is completely deprecated. The shmcli executable is used to run
Server Hardware Manager Command Line Interface. The shmcli maintains the command syntax from secli. You can replace secli
with shmcli in any existing scripts.
NOTE: CLI commands do not have interactive warnings for destructive commands.
NOTE: Always read the updates on Dell.com/support because they often supersede the information in other documents.
The Server Enclosure CLI is a software application that enables storage installers, developers, and engineers to monitor and update storage
enclosures and HDDs or SSDs. By using the CLI, commands can run from an OS prompt, such as the Microsoft Windows command
prompt, or a Linux operating system terminal.
Use the SHM CLI to perform the following functions:
• Display status information about the objects in the system
• Update storage device rmware (EMM and drives)
Topics:
• Using the CLI
• Command syntax structure
• Identifying installed HBAs
• PERC or MegaRAID controllers
• Identifying enclosures and EMMs
• Updating drives
• Identifying drives
Using the CLI
A CLI command consists of the following elements:
• Executable name — shmcli
• Command
• Path to the target
• Additional arguments
The following syntax is the general form of a CLI command:
shmcli command [path-to-target-object] {additional-arguments}
Where,
shmcli — invokes the command-line interface.
5
14 SHM CLI
To Next Page
Loading...