Dell EMC PowerVault MD3060e - Page 20

To retrieve information about all of the drives in a specic enclosure:
shmcli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>
Output
For all the drives in a specic enclosure:
Figure 7. Identifying drives in a specic enclosure
To retrieve information about all of the drives in a drawer within an enclosure:
shmcli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)> -w=<DrawerIndex>
Output
For all the drives in a drawer within an enclosure:
Figure 8. Identifying drives in a drawer within an enclosure
The relevant information to record from the list drives command are the Enclosure Slot Index and the WWN. These values are
required to perform actions on a specic drive such as updating the rmware or making the LED of a drive to blink for identication
purposes.
20
SHM CLI