Dell EMC PowerVault MD3060e - List Drawers; List EMM Slots

List drawers
Description
This command lists the drawers accessible from the specied enclosure. Depending on your enclosure, you may have one drawer or
multiple drawers.
Command syntax
shmcli (list drawers | listdrawers | ldraw) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |
EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 10. List drawers
Parameter Description
-a
Species the adapter used for the command. This is either SAS WWID or
AdapterIndex.
-enc
Species the enclosure used for the command. This is either WWN or EnclIndex.
-h
Provides more information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
Command examples
• list drawers -a = 1 -enc = 500a123456789012
• list drawers -a = 1 -enc = 0
• list drawers -enc = 500a123456789012 -outputformat = xml
List EMM slots
Description
This command lists the EMM Slots and associated information for the specied enclosure.
Command syntax
shmcli (list emm slots | listemmslots | lemmslots) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |
EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
26
CLI reference