Dell EMC PowerVault MD3060e - List Drive Slots

Parameters
Table 11. List EMM slots
Parameter Description
-a
Species the adapter used for the command. This can be either SAS WWID or
AdapterIndex.
-enc
Species the enclosure used for the command. This can be either WWN or
EnclIndex.
-h
Provides more information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
Command examples
• list emm slots -a = 1 -enc = 500a123456789012
• list emm slots -a = 1 -enc = 0
• list emm slots -enc = 500a123456789012 -outputformat = xml
List drive slots
Description
This command lists the HDD slots and associated information about the specied enclosure.
Command syntax
shmcli (list drive slots | listdriveslots | lds) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |
EnclIndex)> [-outputformat=<SupportedOutputFormats>] [-verbose] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] [-verbose] | [-h])
Parameters
Table 12. List hard disk drive slots
Parameter Description
-a
Species the adapter used for the command. This can be either SAS WWID or
AdapterIndex.
-enc
Species the enclosure used for the command. This is either WWN or EnclIndex.
-h
Provides more information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
CLI reference 27