Dell EMC PowerVault MD3060e - List Current Sensors; List Failed Drives

Command examples
• list voltage sensors -a = 1 -enc = 500a123456789012
•
list voltage sensors -a = 1 -enc = 0
•
list voltage sensors -enc = 500a123456789012 -outputformat = xml
List current sensors
Description
Lists the current sensors accessible from the specied enclosure.
Command syntax
shmcli (list current sensors | listcurrentsensors | lcs) (-a=<(SAS WWID| AdapterIndex)> -
enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 17. List current sensors
Parameter Description
-h, -help
Provides more information about the command, description, and
usage.
-outputformat
You can specify the following output formats: XML or JSON.
-a, -adapter
Specify the adapter used for the command. This is either SAS
WWID or the AdapterIndex.
-enc
Specify the enclosure is used for the command. This is either WWN
or the EnclosureIndex.
Command examples
• list current sensors -a = 1 -enc = 500a123456789012
• list current sensors -a = 1 -enc = 0
• list current sensors -enc = 500a123456789012 -outputformat = xml
List failed drives
Description
Lists the drives that have been predicted to fail and/or drives which have returned errors through system calls. The output describes the
call attempted and the SCSI error codes returned.
CLI reference
31