Dell EMC PowerVault MD3060e - Show Drive Information

Show drive information
Description
This command provides detailed information about the specied HDD.
Command syntax
shmcli (info drive | infodrive | id) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN | EnclIndex)>
[-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex | DrawerSlotIndex | Serial Number | Drive OS
Path)> [-outputformat=<SupportedOutputFormats>] [-smart] | -d=<(WWN | Serial Number | Drive OS
Path [-outputformat=<SupportedOutputFormats>>)] [-smart] | [-h])
Parameters
Table 20. Drive information
Parameter Description
-a
Species the adapter used for the command. This is either SAS
WWID or AdapterIndex.
-enc
Species the enclosure used for the command. This is either WWN
or EnclIndex.
-w
Species the drawer index used for the command.
-d
Species the hard disk drive used for the command. This can be
any of the following:
• WWN — Can be used anytime.
• Serial Number — Can be used anytime.
• Drive OS path — Can be used anytime.
• Drawer Slot Index (Index of the drive in the specic drawer) —
Use if the 'drawer' argument is used for the command.
• Enclosure Slot Index — Use if drawer argument is not being
used for the command
-outputformat
You can specify the following output formats: XML or JSON.
-h
Provides more information about the command, description, and
usage.
-smart
Display the S.M.A.R.T attribute data for the specic physical drive.
Command examples
• info drive -a = 500abcdefgh12345 -enc = 1 -w = 0 -d = 4
• info drive -a = 1 -enc = 1 -d = //./PHYSICALDRIVE50 -smart -outputformat = xml
• info drive -d = 500a123456789012
CLI reference
33