Dell EMC PowerVault MD3060e - View Event Log; View Md3060 E SAS Diagnostics

Parameters
Table 22. Firmware File information
Parameter Description
-file
Specify the le at the given path used for the command.
-outputformat
You can specify the following output formats: XML or JSON.
-h
Provides more information about the command, description, and
usage.
NOTE: If the lename contains special characters, you must enclose the le path within escaped double quotation marks.
View event log
Description
View all or part of the contents of the event log le based on date range and logging level.
Command syntax
shmcli (view log | vlog) ([-startDate=<StartDate> -endDate=<EndDate> -event=<EventType>] | [-
event=<EventType> -count=<LatestEventCount>] | [-h])
Parameters
Table 23. View event log
Parameter Description
-h
Provides more information about the command, description, and usage.
-startDate
Display logs recorded on or after this date. Acceptable format is MM/DD/YY.
-endDate
Display logs recorded no later than this date. Acceptable format is MM/DD/YY.
-count
Display the latest number of events of a specied category. The viewable count of latest events can be a
value from 1 to 1000.
-event
Display logs of the given event severity type. This could be either of the following: INFO, CRITICAL,
ERROR, or WARN. Logs are printed irrespective of the severity level, if this argument is not provided.
View MD3060e SAS diagnostics
Description
Displays a list of SAS diagnostic information associated with the supplied enclosure.
CLI reference
35