Dell EMC PowerVault MD3060e - Page 36

Command syntax
shmcli 3060ediags (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat=] | -
enc= [outputformat=] | [-h])
Parameters
Table 24. View MD3060e SAS diagnostics
Parameter Description
-a
Species the adapter used for the command. This is either SAS
WWID or AdapterIndex.
-enc
Species the enclosure used for the command. This is either WWN
or EnclIndex.
-h
Provides information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
36 CLI reference