Dell EMC PowerVault MD3060e - Update Commands Reference; Updating Drive Firmware via SHM CLI

Update commands
Update drive rmware
Description
This command updates the rmware version of the specied drives by using the provided rmware le. This command also veries the
integrity of the rmware le before applying the rmware.
Command syntax
shmcli (update drive | updatedrive | ud) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN |
EnclIndex)> [-w=<DrawerIndex>]] [-d=<(WWN | EnclosureSlotIndex | DrawerSlotIndex | Serial
Number | Drive OS Path)>] (-file=<FW.FilePath> [-force] | -directory=<FW.DirectoryPath>) [-
show] [-multi] | -enc=<WWN> [-w=<DrawerIndex>] [-d=<(WWN | EnclosureSlotIndex |
DrawerSlotIndex | Serial Number | Drive OS Path)>] (-file=<FW.FilePath>[-force] | -
directory=<FW.DirectoryPath>) [-show] [-multi] | -d=<(WWN | EnclosureSlotIndex |
DrawerSlotIndex | Serial Number | Drive OS Path)> (-file=<FW.FilePath>[-force] | -
directory=<FW.DirectoryPath>) [-show] [-multi] | [-h])
Parameters
Table 25. Update drive
rmware
Parameter Description
-a
Species the adapter used for the command. This is either SAS
WWID or AdapterIndex.
-d
Species the HDD used for the command. This can be any of the
following:
• WWN—Can be used anytime.
• Serial Number—Can be used anytime.
• Drive OS path—Can be used anytime.
• Enclosure Slot Index—Use if drawer argument is not used for
the command.
• Drawer Slot Index (Index of the drive in the specic drawer)—
Use if drawer argument is used for the command.
• Enclosure Slot Index—Use if drawer argument is not being used
for the command.
-enc
Species the enclosure used for the command. This is either WWN
or EnclIndex.
-w
Species the drawer index used for the command.
-file
Species the le at the given path used for the command.
-h
Provides additional information about the command, description,
and usage.
-show
Display the list of drives that are updated by using the specied
rmware le. The drives are not updated if this option is used.
7
Update commands 37