Storing components
If you do not install your VEP4600 and components immediately, properly store the platform and all optional components using these
guidelines:
• Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40°F to 158°F).
• Store on a dry surface or oor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the VEP4600 and accessories. After you remove the original packaging, place the VEP4600 and components on
an anti-static surface.
Site preparations 15
To Next Page
Loading...
