Figure 10. Platform rail attachment
3 Repeat on the other side of the platform.
4 Attach the platform rails to the four-post rack rails using two user-supplied screws on each side.
Figure 11. Platform four-post front installed
5 Slide the rear platform rail from the back to the front bracket. Secure with two user-supplied screws on each side.
Figure 12. Platform four-post rear installed
About three inches before you fully insert your platform, the rail locking feature engages to keep the platform from inadvertently sliding
out and falling.
To remove the platform, unscrew the rack-mounting screws and slide the platform forward.
20
VEP4600 installation
To Next Page
Loading...
