Fan module installation
The fan modules in the VEP4600 are eld replaceable. Module slot 1 is on the left side of the platform; module slot 5 is on the right side of
the platform.
1 Take the fan module out of the shipping box.
2 Slide the module into the bay.
Figure 16. VEP4600 fan module installation
1
Fan module installation
Fan module replacement
To request a hardware replacement, see https://www.dell.com/support.
CAUTION
: Complete the following steps within one minute or the platform temperature could rise above safe thresholds and the
platform could shut down:
1 Slide the fan module out of the bay.
2 Slide the replacement module into the bay.
26
Fans
To Next Page
Loading...
