Figure 41. Save settings confirmation screen
7. From the VMware ESXi 6.7 screen, press F2 to configure the static network.
The Authentication Required screen displays.
8. In the field provided, enter the required password then press Enter.
NOTE:
The Login Name field is already populated. This autopopulation only occurs at the log in screen.
The System Customization screen displays.
9. From the System Customization screen, select Configure Management Network and then press Enter.
Figure 42. System customization screen
10. From the Configure Management Network screen, use the arrow keys to select Network Adapters then press Enter.
11. From the Network Adapters screen, select the network adapter that is connected, press the Space bar to select the adapter, then
press the Enter key to save the changes.
30
Download and install VMware ESXi 6.7
To Next Page
Loading...
