36 | Network Planning Guide
© 2018 Dell Inc. or its subsidiaries
VxRail Network Configuration Table
The Dell EMC service representative will use a VxRail Pre-Site Installation tool with the following information:
External
Management
VLAN ID
The recommended is untagged traffic on the Native VLAN. If you want the host to send only
tagged frames, manually configure the VLAN on each ESXi™ host using DCUI, and set
tagging for your management VLAN on your switch before you deploy VxRail.
Internal
Management
VLAN ID
This network traffic should stay isolated on the top-of-rack switches. The default VLAN ID is
3939.
ESXi
hostnames and
IP addresses
ESXi starting address for IP pool
ESXi ending address for IP pool
vCenter Server
Leave blank if
Customer
Supplied VC
vCenter Server IP address
Platform Services Controller hostname
Platform Services Controller IP address
Customer
Supplied
vCenter Server
Leave blank if
VxRail VC
Customer Supplied Platform Services Controller (PSC) Hostname (FQDN)
Leave blank if PSC is embedded in Customer Supplied vCenter Server
Customer Supplied vCenter Server hostname (FQDN)
Customer Supplied vCenter Server SSO domain
admin username/password or the newly created VxRail non-admin username and password
New VxRail management username and password
Customer Supplied datacenter name
Starting address for IP pool
Ending address for IP pool
Starting address for IP pool
Ending address for IP pool
VM Network name and VLAN ID
VM Network name and VLAN ID
vRealize Log Insight™ hostname
vRealize Log Insight IP address
Syslog Server (instead of Log Insight)
Optional Feature-Driven Settings
If the VxRail personality profile is to be enabled on a pair of Dell switches running SmartFabric