Dell EMC VxRail E series - Page 45

45 | Network Planning Guide
© 2018 Dell Inc. or its subsidiaries
vSphere Clients to vCenter Server
vSphere Clients
vCenter Server
TCP
5480, 8443,
9443, 10080,
10443
Managed Hosts to vCenter
Host ESXi Management
vCenter Server
TCP
443, 902,
5988,5989,
6500, 8000,
8001
Managed Hosts to vCenter
Heartbeat
Host ESXi Management
vCenter Server
UDP
902
If you plan to enable Dell-EMC ‘call-home’ with an external SRS gateway already deployed in your data center, open the necessary
ports to enable communications between the SRS gateway and VxRail Manager
VxRail Manager and External SRS Gateway
Description
Source Device(s)
Destination Device(s)
Protocol
Port(s)
SRS Connect Home
VxRail Manager
SRS Gateway
TCP
21,5400-5413
SRS Remote Support
SRS Gateway
VxRail Manager
TCP
22
SRS Process Connect Home Files
VxRail Manager
SRS Gateway
TCP
25
SRS Device Notification
VxRail Manager
SRS Gateway
TCP
443
SRS Management
VxRail Manager
SRS Gateway
TCP
9443
Additional firewall port settings may be necessary depending on your data center environment. The list of documents in this table
is provided for reference purposes.
Description
Reference
List of Incoming and Outgoing Firewall Ports
for ESXi 6.5 Hosts
List of Incoming and Outgoing Firewall Ports for ESXi 6.5 Hosts
List of Incoming and Outgoing Firewall Ports
for ESXi 6.0 Hosts
List of Incoming and Outgoing Firewall Ports for ESXi 6.0 Hosts
Required port to access VMware vCenter
Server and VMware ESXi hosts
TCP and UDP Ports required to access VMware vCenter Server and VMware ESXi hosts
Secure Remote Services Port Requirements
Dell EMC Secure Remote Services Documentation