Dell 6100 - BIOS Upgrade

2 Dell PowerEdge 6100/200 System Microprocessor Replacement
B
IOS Upgrade
1. Insert the BIOS diskette that came in the replacement kit into drive A.
2. Turn on the system.
3. After the system completes the boot routine, follow the instructions on
the monitor.
4. After the message BIOS has been successfully installed
appears on the monitor, remove the diskette from drive A and follow
the instructions on the monitor to reboot the system.
WARNING: The system may have more than one power supply cable.
To reduce the risk of electrical shock, a trained service technician must
disconnect all power supply cables before servicing the system.