Dell Alienware Area-51 R3 Threadripper Edition User Manual

Removing the antenna cables
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See “
Removing the side panels”.
3. Remove the handle bars.
4. Remove the graphics card.
5. Remove the wireless card.
6. Remove the front bezel.
7. Remove the rear bezel.
Procedure
1. Disconnect the antenna cables from the wireless card.
2. Remove the gray antenna cable from the routing guide on the chassis.
1.
antenna cables 2. wireless card
3. routing guide 4. chassis
117

Dell Alienware Area-51 R3 Threadripper Edition Specifications

General

Brand	Dell
Model	Alienware Area-51 R3 Threadripper Edition
Category	Desktop
Language	English