Dell AXIM X50 User Guide

www.dell.com | support.dell.com
Using Cisco
®
LEAP Wireless LAN Security
Your Dell Axim X50 supports 802.1X network authentication using Cisco
LEAP. Cisco LEAP can be configured using the Odyssey Client application.
NOTE: Before starting, ensure that your Wireless On/Off button is in the
On position.
NOTE: LEAP is not supported on a peer-to-peer network.
NOTE: LEAP is not supported on the low end version of Axim X50.
To start the application do the following steps.
1 Ta p Start → Settings → Connections → Odyssey Client icon.
2 Ta p Settings → Enable Odyssey to start using the client.
To start using LEAP, perform the following steps.
1 Obtain the following information from your network administrator:
• Network name
• Association mode
• Encryption method
2 From the Odyssey Client window, tap on Settings → Configure → Add .
3 Enter the network name (SSID) if known, or tap on Scan to search the
available Access Points. Tap
Next .
4 LEAP will only support an infrastructure network, so do not change the
default settings in the drop-down menu. Tap
Next .
5 Fill in Association Mode and Encryption method. Tap Next .
September 2004

Dell AXIM X50 Specifications

General

Brand	Dell
Model	AXIM X50
Category	Handhelds
Language	English