182 Understanding the Printer Menus
Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a
connection is made.
Va lu es :
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal
speaker when Receive Mode is set to Telephone/Fax.
Va lu es :
Line Type
Purpose:
To select the line type.
Va lu es :
Tone/Pulse
Purpose:
To select the dialing type.
Va lu es :
Off Turns off the volume of the line monitor.
Low Sets the volume of the line monitor.
Medium*
High
Off Turns off the volume of the ring tone.
Low Sets the volume of the ring tone.
Medium
High*
PSTN* Sets the line type to PSTN.
PBX Sets the line type to PBX.
Tone* Sets the dialing type to
Tone.
Pulse (10pps) Sets the dialing type to Pulse
(10 pulse per second).
To Next Page
Loading...
