Copying 243
Changing the Default Settings
The COPY menu options, including contrast, and image quality can be set to the most frequently used modes.
When you copy a document, the default settings are used unless they are changed by using the corresponding
buttons on the operator panel.
NOTE: While you set copy options, pressing the AC (All Clear) button cancels the changed settings and returns to the default
status.
To create your own default settings:
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
(Set)
button.
3
Ensure that
Defaults Settings
is highlighted, and then press the
(Set)
button.
4
Ensure that
Copy Defaults
is highlighted, and then press the
(Set)
button.
5
Press the button until the desired menu item is highlighted, and then press the
(Set)
button.
6
Press the or button until the desired setting is highlighted or enter the value using the numeric keypad, and
then press the
(Set)
button.
7
Repeat steps 5 and 6, as needed.
8
To return to the previous screen, press the
(Back)
button.
To Next Page
Loading...
