Faxing 269
7
Reboot the printer by turning the power switch off and then on.
Ringer Volume
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
(Set)
button.
3
Press the button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press the button until
Fax Settings
is highlighted, and then press the
(Set)
button.
5
Press the button until
Ring Tone Volume
is highlighted, and then press the
(Set)
button.
6
Press
the
button until the desired volume is highlighted, and then press the
(Set)
button.
7
Reboot the printer by turning the power switch off and then on.
Specifying the Fax Settings
Changing the Fax Settings Options
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
(Set)
button.
3
Press the button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press the button until
Fax Settings
is highlighted, and then press the
(Set)
button.
5
Press the button until the desired menu item is highlighted, and then press the
(Set)
button.
6
Press the or button until the desired setting is highlighted or enter the value using the numeric keypad.
7
Press the
(Set)
button to save the selection.
8
If necessary, repeat steps 5 to 7.
9
To return to the previous screen, press the
(Back)
button.
To Next Page
Loading...
