Operator Panel 93
Status of Wi-Fi | WPS Button Backlight (Dell C1765nfw Color Multifunction Printer only)
This section describes when the backlight of the (Wi-Fi | WPS) button lights up or blinks.
For more information, see "Wireless Problems (Dell C1765nfw Color Multifunction Printer only)" on page 356.
*
1
You can enable/disable the Wi-Fi settings. For more information, see "Wi-Fi (Dell C1765nfw Color Multifunction Printer only)" on page 180.
Wi-Fi | WPS Button
Backlight
Wi-Fi
settings
*1
Printer Status Error Message
Off N/A Connected to the network via Ethernet
cable;
Wi-Fi settings is not available
when an Ethernet cable is connected to
the printer.
-
Off --
On The printer enters Sleep/Deep Sleep mode -
On
On Wireless link established -
Blinking
normal
On Searching for wireless LAN access point or
router
-
Blinking
slowly
On Searching/Connecting with WPS access
point or router during wireless operation
-
Blinking
fast
On No wireless LAN access point or router
found within the specified time
Wireless Error
016-920 System Setup Fail
WPS Connection failure; Security setting
of the wireless LAN access point or router
is WEP, which is unsupported on WPS.
Wireless Error
016-921 System Setup Fail