EasyManua.ls Logo

Dell C1765NFW - Page 179

Dell C1765NFW
382 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Understanding the Printer Menus 177
Wireless Status (Dell™ C1765nfw Color Multifunction Printer only)
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator panel to improve
the status of the wireless connection.
Va lu es :
NOTE: This item is displayed when the Ethernet cable is disconnected and Wi-Fi is set to On.
Wireless Setup (Dell C1765nfw Color Multifunction Printer only)
Purpose:
To configure the wireless network interface.
Va lu es :
Connection Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
SSID Displays the name that identifies the wireless network.
Encryption Type Displays the encryption type.
Select Access Select the access point from the list.
WEP Key Entry When you select an access point using WEP as the security method,
enter the WEP key. For 64bit keys, up to 10 hexadecimal characters can
be entered. For 128bit keys, up to 26 hexadecimal characters can be
entered.
PassPhrase Entry When you select an access point using WPA, WPA2, or Mixed as the
encryption type, enter the passphrase of 8 to 63 alphanumeric
characters.
Manual Setup Enter Network
(SSID)
Specify a name to identify the wireless network. Up to 32 alphanumeric
characters can be entered.
Infrastructure Select when you configure the wireless setting through the access point
such as a wireless router.
No Security
*
Specify No Security to configure the wireless setting without specifying
a security method from WEP, WPA-PSK-TKIP, and WPA2-PSK-AES.
Mixed mode PSK Select to configure the wireless setting with the encryption type of
Mixed mode PSK. Mixed mode PSK automatically selects the
encryption type from either WPA-PSK-TKIP, WPA-PSK-AES, or
WPA2-PSK-AES.
PassPhrase
Entry
Specifies the passphrase of alphanumeric characters
from 8 to 63.
WPA-PSK-TKIP Select to configure the wireless setting with the security method of
WPA-PSK-TKIP.
PassPhrase
Entry
Specify the passphrase of alphanumeric characters
from 8 to 63.

Table of Contents

Related product manuals