Understanding the Printer Menus 201
Resetting Defaults
After executing this function and rebooting the printer, the menu parameters or data are reset to their default values.
NOTE: A password is required to enter the Admin Menu menu when Panel Lock Set is set to Enable. In this case,
enter the password you specified, and press the (Set) button.
1
Press the
(Menu)
button.
2
Press the button until
System
is highlighted, and then press the
(Set)
button.
3
Press the button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4
Press the button until
Maintenance
is highlighted, and then press the
(Set)
button.
5
Press the button until
Initialize NVM
is highlighted, and then press the
(Set)
button.
6
Press the button until the desired setting is highlighted, and then press the
(Set)
button.
7
Press the button until
Yes
is highlighted, and then press the
(Set)
button.
The printer restarts automatically to apply the settings.
To Next Page
Loading...
