238 Copying
Document Size
To specify the default document size:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the (
Copy
) button.
3
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
4
Press the button until
Document Size
is highlighted, and then press the (
Set
) button.
5
Press
the
button to select the desired settings, and then press the (
Set
) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Original Type
To select the copy image quality:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the (
Copy
) button.
3
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
4
Press the button until
Original Type
is highlighted, and then press the (
Set
) button.
5
Press the button to select the desired settings, and then press the (
Set
) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
A4 (210 x 297 mm)
*1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
*1
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
*1
The default for
Document Size varies
depending on country specific
factory default.
To Next Page
Loading...
