272 Scanning
When specifying destinations, you can select
TO
or
BCC
as a destination type.
To enter the e-mail address directly using the numeric keypad:
a
Ensure that
Enter Address
is highlighted, and then press the (
Set
) button.
b
Enter the e-mail address using the numeric keypad, and then press the (
Set
) button.
NOTE: Only one destination can be specified at a time. To specify multiple destinations, use the Address Book.
NOTE: The destination type is automatically set to TO.
To select personal addresses from Address Book:
a
Press the button until
Address Book
is highlighted, and then press the (
Set
) button.
OR
Press the (
Contacts
) button, press the button until
All Entries
is highlighted, and then press the
(
Set
) button.
b
Press the button to move the cursor to the desired destination.
You can also directly find the destination by its ID number on the Address Book. Enter the number using the
numeric keypad, and then press the (
Set
) button.
To check the detailed information of the destination, press the # button.
c
Press the button repeatedly to display
TO
or
BCC
as a destination type, and then press the (
Set
)
button.
To select group addresses from Address Book:
a
Press the button until
E-Mail Group
is highlighted, and then press the (
Set
) button.
OR
Press the (
Contacts
) button, press the button until
E-Mail Group
is highlighted, and then press
the (
Set
) button.
b
Press the button to move the cursor to the desired destination.
You can also directly find the destination by its ID number on the Address Book. Enter the number using the
numeric keypad, and then press the (
Set
) button.
To check the detailed information of the destination, press the # button.
c
Press the button repeatedly to display
TO
or
BCC
as a destination type, and then press the (
Set
)
button.
To search destinations from Address Book:
a
Press the button until
Search Address Book
is highlighted, and then press the (
Set
) button.
OR
Press the (
Contacts
) button, press the button until
Search
is highlighted, and then press the
(
Set
) button.
b
Use the numeric keypad to enter the first character of the personal or group names whose destinations you
want to specify, and then press the (
Set
) button.
Destinations with names beginning with the specified character are displayed.
c
Press the button to move the cursor to the desired destination.
To check the detailed information of the destination, press the # button.
To Next Page
Loading...
