Installing display bezel
1 Place the display bezel on the display assembly.
2 Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly.
3 Replace the 4 screws to secure the display bezel to the display assembly
4 Replace the mylar caps on the display bezel.
5 Install the:
a display assembly
b battery
c base cover
d microSD card
6 Follow the procedure in After working inside your computer.
Display panel
Removing display panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
d display assembly
e display bezel
3 To remove the display panel:
a Remove the 4 (M2x3) screws that secure the display panel to the display assembly [1] and lift to turn the display panel to access
the eDP cable [2]
34
Removing and installing components