Installing display panel
1 Connect the eDP cable to the connector, and ax the tape.
2 Replace the display panel to align with the screw holders on the display assembly.
3 Replace the 4 screws to secure the display panel to the display assembly.
4 Install the:
a display bezel
b display assembly
c battery
d base cover
e microSD card
5 Follow the procedure in After working inside your computer.
Display hinges
Removing display hinge
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
d display assembly
e display bezel
f display panel
3 To remove the display hinge:
a Remove the 2 (M2x3) screws and 4 (M2.5x2.5) screws that secure the display hinge to the display assembly.
Removing and installing components
37