Installing display cable
1 Route the display cable to its slot in the display assembly.
2 Install the:
a display panel
b display bezel
c display assembly
d battery
e base cover
f microSD card
3 Follow the procedure in After working inside your computer.
Camera
Removing camera
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
d display assembly
e display bezel
f display panel
3 To remove the camera:
a Use a plastic scribe to pull the camera out from the chassis [1].
b Peel the adhesive tape that secures the camera to the chassis [2].
c Disconnect the camera cable from the connector [3].
40
Removing and installing components