Dell D15U - Page 65

10. Remove the processor.
11. Remove the optional I/O module (VGA/HDMI/DP/Serial)or the optional Type-C module, whichever applicable.
About this task
The following images indicate the system board connectors.
1. M.2 WLAN connector
2. M.2 SSD PCIe connector (2230/2280)
3. Coin-cell battery
4. Optional video connector (VGA Port/DisplayPort 1.4a (HBR3)/HDMI 2.1 Port)
5. Optional connector (USB 3.2 Gen 2 Type-C Port)
6. Optional PS/2, serial port connector
7. Processor socket
8. Fan connector
9. Internal speaker connector
10. Memory-module slots
11. M.2 SSD PCIe connector (2230/2280)
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
65