Table 37. System setup optionsāSystem Management menu (continued)
System Management
Wake on LAN/WLAN Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Auto on Time Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Intel AMT Capability
Enable Intel AMT Capability Enable or disable the Intel AMT capabilty.
By default, the Restrict MEBx Access option is enabled.
MEBx Hotkey Enable or disable MEBx hotkey.
By default, the option is disabled.
USB Provision
Enable USB Provision Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.
By default, the option is disabled.
SERR Messages Enable or disable SERR messages.
By default, the option is enabled.
First Power On Date Set ownership date
By default, the option is disabled.
Diagnostics Enables OS agent request to schedule onboard diagnostics.
By default, the option is enabled.
Power-On-Self-Test Automatic
Recovery
Enables automatic recovery when the computer becomes unresponsibe when
performing a BIOS Power-On-Self-Test (POST). This may revert BIOS settings
to a recoverable state.
By default, the option is enabled.
Table 38. System setup optionsāKeyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enable or disable the keyboard error detection.
By default, the option is enabled.
Numlock LED
Enable Numlock LED Enable or disable Numlock LED.
By default, the option is enabled.
Device Configuration Hotkey Access
Device Configuration Hotkey Access Enable or disable users to access device configuration by using hotkeys.
By default, the option is enabled.
88 BIOS setup
To Next Page
Loading...
