Event Log Configuration Submenu
Security Screen
Power Screen
Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is not
protected unless the write-protect tab is in place.
The event log function is activated when set to Enabled (default). Disabled deactivates the event log function.
Clears the event log when the computer restarts if set to Yes. Retains the event log information if set to No (default).
Press <Enter> to view the event log.
Press <Enter>, and then select Yes or No to mark DMI events as either read or unread.
Displays the space available for the event log.
Displays the validity of the event log.
Indicates whether a supervisor password has been assigned.
Indicates whether a user password has been assigned.
Press <Enter> to set and confirm a supervisor password. Pressing <Enter> twice resets a supervisor password.
Press <Enter> to set and confirm a user password. Pressing <Enter> twice resets a user password.