Adding Parts 81
Removing an AGP Card
1 Press the card lever toward the PCI connector.
2 Pull the card up and out of the card clip.
Installing an AGP Card
1 To add or replace the card, press the card lever toward the PCI connector and gently
press the card into the AGP connector until it clicks into place.
2 Release the card lever, ensuring that the tab fits into the notch on the front end of the
card.
tab
card clip
lever
notch
PCI connector
AGP connector
back of computer
card clip
lever
AGP card
card clip
slot connector
J2936bk0.book Page 81 Tuesday, September 2, 2003 3:06 PM
To Next Page
Loading...
