Removing the Drive Panel
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
1 sliding plate 2 sliding plate lever 3 drive panel
3. Pull the sliding plate lever to the right and hold in place while pushing the panel from the inside. Pivot the panel to the
left to release it from its side hinges.
4. Set the drive panel aside in a secure location.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (24 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
