Dell Dimension 9200 - Page 74

Documentation
1 sliding plate 2 sliding plate lever 3 drive panel
2. Align the drive panel tabs with the side-door hinges.
3. Rotate the drive panel toward the computer until the sliding plate lever clicks into place and the drive panel snaps into
place on the front panel.
Drives
Your computer supports:
● Two hard drives (Serial ATA)
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (27 of 68) [12/9/2007 11:22:24 PM]