Figure 50. ODD and no PERC configuration
Table 19. ODD and no PERC configuration
From To
CTRL_SRC_SB1 (Signal connector on the front PERC) BP_DST_SB1 (Signal connector on backplane)
CTRL_DST_SA1 (Signal connector on the drive backplane) SL9_PCH_SA1 (Signal connector on system board)
ODD (Optical Disk Drive connector on system board) ODD (Optical Disk Drive)
ODD_PWR_1 (ODD card power connector) SIG_PWR_3 (Power connector on system board)
BP_PWR_1 (Power connector on backplane) SIG_PWR_3 (Power connector on system board)
BOSS_PWR (BOSS card power connector) BOSS_PWR (Power connector for BOSS card on system
board)
SL10_PCH_PA5 (BOSS signal connector on system board) BOSS signal on BOSS S2 card module
58 Installing and removing system components
To Next Page
Loading...
