Cable routing
Figure 87. Cable routing - 10 x 2.5 drive backplane and 2 x 2.5 rear drive backplane with mini PERC
1.
Backplane 2. Backplane expander
3. Backplane signal cable (BP: J_BP_SIG to MB: J_BP_SIG1) 4. Cable routing clip
5. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1) 6. Backplane expander power cable
7. NVMe cable (BP PCIe B1 and BP PCIe A1) 8. NVMe cable (BP PCIe B0 and BP PCIe A0)
9. Rear backplane power cable(Rear BP: J_BP_BPO to MB:
J_BP_PWR_A1)
10. Rear backplane signal cable (Rear BP: J_BP_SIG0 to MB:
J_BP_SIG1)
11. Rear backplane 12. PCIe expansion card
13. PCIe cable 14. Mini PERC card
15. System board 16. SAS cable (BP: MiniSAS HD A2 to MB: J_SAS_1)
17. SAS cable (BP: BP SAS A0, BP SAS B0 to MP:
J_STORAGE1)
18. Cable routing clip
NOTE: The internal cable connectors are not hot-pluggable.
Installing and removing system components 101
To Next Page
Loading...
