Figure 88. Cable routing - 10 x 2.5 drive backplane with mini PERC
1.
Backplane 2. Backplane expander
3. Backplane signal cable (BP: J_BP_SIG to MB: J_BP_SIG1) 4. Cable routing clip
5. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1) 6. Backplane expander power cable(BP: J_BP_PWR_A to MB:
J_BP1)
7. NVMe cable (BP PCIe B1 and BP PCIe A1) 8. NVMe cable (BP PCIe B0 and BP PCIe A0)
9. Mini PERC card 10. System board
11. SAS cable(BP: BP SAS A0, BP SAS B0 to MP:
J_STORAGE1)
12. Cable routing clip
102 Installing and removing system components
To Next Page
Loading...
