Figure 51. Installing the integrated storage controller card
1. integrated storage controller cable 2. integrated storage controller card
3. integrated storage controller card connector on the
system board
4. integrated storage controller card holder
Next steps
1. Install the expansion card riser 1.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 67
Related tasks
Before working inside your system on page 68
Removing the cooling shroud on page 75
Removing expansion card risers on page 127
Installing expansion card risers on page 130
Installing the cooling shroud on page 76
After working inside your system on page 68
Installing and removing system components 115
To Next Page
Loading...
