Next steps
If applicable, install the front bezel.
Related references
Safety instructions on page 67
Related tasks
Removing the optional front bezel on page 69
Installing the optional front bezel on page 70
Installing a 3.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 96. Installing a 3.5-inch hard drive blank
a. hard drive blank
Next steps
If applicable, install the front bezel.
Related references
Safety instructions on page 67
Related tasks
Removing the optional front bezel on page 69
Installing the optional front bezel on page 70
Removing a hot swappable hard drive or solid state drive
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
Installing and removing system components 163
To Next Page
Loading...
