System Information on page 49
Memory Settings on page 50
Processor Settings on page 51
SATA Settings on page 53
Integrated Devices on page 56
Serial Communication on page 59
System Profile Settings on page 60
Miscellaneous Settings on page 62
iDRAC Settings utility on page 63
Device Settings on page 64
Related tasks
Viewing System BIOS on page 39
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related references
System BIOS on page 38
System BIOS Settings details on page 39
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option Description
System
Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor
Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
settings.
Network Settings Specifies options to change the network settings.
Integrated
Devices
Specifies options to manage integrated device controllers and ports and specify related features and
options.
Serial
Communication
Specifies options to manage the serial ports and specify related features and options.
Pre-operating system management applications 39
To Next Page
Loading...
