EasyManua.ls Logo

Dell EMC PowerEdge R730xd - Page 46

Dell EMC PowerEdge R730xd
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
AC Power
Recovery Delay
Sets the time delay for the system to power up after AC power is restored to the system. This option is
set to Immediate by default.
User Defined
Delay (60s to
240s)
Sets the User Defined Delay option when the User Defined option for AC Power Recovery Delay is
selected.
UEFI Variable
Access
Provides varying degrees of securing UEFI variables. When set to Standard (the default), UEFI variables
are accessible in the operating system per the UEFI specification. When set to Controlled, selected UEFI
variables are protected in the environment and new UEFI boot entries are forced to be at the end of the
current boot order.
Secure Boot
Policy
When Secure Boot policy is set to Standard, the BIOS uses the system manufacturers key and
certificates to authenticate pre-boot images. When Secure Boot policy is set to Custom, the BIOS uses
the user-defined key and certificates. Secure Boot policy is set to Standard by default.
Secure Boot
Policy Summary
Specifies the list of certificates and hashes that secure boot uses to authenticate images.
Related references
System Security on page 44
Related tasks
Viewing System Security on page 45
Secure Boot Custom Policy Settings
Secure Boot Custom Policy Settings is displayed only when Secure Boot Policy is set to Custom.
Related references
Secure Boot Custom Policy Settings details on page 47
Related tasks
Viewing Secure Boot Custom Policy Settings on page 46
Viewing Secure Boot Custom Policy Settings
To view the Secure Boot Custom Policy Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Security.
5. On the System Security screen, click Secure Boot Custom Policy Settings.
46 Pre-operating system management applications

Table of Contents

Related product manuals