Figure 32. Removing a cooling fan
1. cooling fan assembly 2. cooling fan connector (6)
3. fan release tab (6) 4. cooling fan (6)
5. cooling fan connector on the system board (6)
Next steps
1. Install the cooling fan.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 67
Related tasks
Before working inside your system on page 68
Installing a cooling fan on page 87
After working inside your system on page 68
Installing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
NOTE: The procedure for installing each fan is identical.
Steps
1. Align the connector at the base of the cooling fan with the connector on the system board.
2. Slide the cooling fan into the securing slot until the tab locks into place.
Next steps
Follow the procedure listed in the After working inside your system section.
Installing and removing system components 87
To Next Page
Loading...
